What are Art-Net and sACN? – Learn Stage Lighting .com

What are Art-Net and sACN?

By David / a couple of years ago

Running DMX signal over ethernet is something that we are going to see more and more of as we move through time.

If you’re not familiar with these protocols yet, watch the video below or read the transcript to get the basics.

Then, join me below the video for a gear guide to Art-Net and sACN nodes:


DMX can send up to 512 channels down 1 cable. So what’s a person to do when you need more than 512 channels?

More cables!

As technology moves forward, there becomes more and more the need to send large amounts of DMX channels down

This can make data distribution a nightmare – not to mention costly!

That’s why some really smart people tackled this problem, allowing us to send DMX over ethernet.

This video has been created as a brief overview of the topic. There are a whole lot of details I leave out, keeping only the basics you need to know as an introduction to this topic!

How Does DMX over Ethernet Work?

As of the time of this video, DMX can be sent through ethernet through (2) different protocols – Art-Net and sACN.

Art-Net was devised by Artistic License to solve the 512 channel limit that DMX has. It allows you to send 32,768 universes of DMX data down a single network cable.

The upside? Art-net is supported by more gear and is an older protocol.

sACN stands for streaming Architecture of Control Networks and is also known as E1.31 and was developed by ESTA – the Entertainment Services and Technology Association.

sACN allows you to run 63,999 universes of DMX data down a single network cable.

Both protocols are tested, solid ways to send DMX over ethernet. At the time of this recording, sACN seems to be becoming more popular. but time will tell!

Both protocols use “nodes” to output standard DMX to your lighting. These nodes are all on the same network as your console and can be reconfigured to put out different DMX universes, and multiple nodes can output the same universe.

Some fixtures ARE the node and can take in DMX over ethernet natively, some even outputting regular DMX to other fixtures.

No longer do large DMX systems require massive bundles of DMX cables. The future is here, and if it hasn’t come to your lighting rig yet, it will soon!

Art-Net and sACN Gear Guide:

Now that we’ve got the very basics of Art-Net and sACN down, it’s time to talk gear.  There are a TON of nodes on the market, but how do you know which node is right for you?

Like anything in our world of lighting, there are cheap nodes, middle of the road nodes, and expensive, professional-grade nodes.

But just like an LED par can or moving light, there are drastic differences between the cheap units and the quality units that you should consider before buying:

Build Quality

You may not need the “like-a-tank” build quality of the most expensive nodes, but cheaping out can give you poor results as well.

For example, there are a number of cheap, imported nodes that feature thin plastic casings and cheap RJ-45 or XLR connectors for DMX output – so, if you’re not going to baby your gear, you probably want to pass them up.

Higher quality nodes are also going to feature great quality power supplies and components – and carry the warranty to assure you they won’t give up during your show or service! (and if they do, they’ll be replaced)

Ease of Use

Many (but not all!) Art-Net and sACN nodes allow you to configure them remotely via a web browser or application, making it easy to change settings on the gig.

You’ll find that cheap units require you to dial up their IP address directly, while nicer units will have a computer application that can search out and find the nodes on your network automatically, then configure them via an easy-to-use interface.


Feature-wise, most Art-Net/sACN nodes are able to output either protocol and are able to assign each universe you desire to any of the ports.  You generally can also assign a single universe to multiple output ports – reducing the need for DMX splitters in some situations.

Most nodes also support the ability to take DMX-in, though some require you to use a turn-around adapter.

Where the professional-grade units take a step above the cheap guys is in the ability to setup merging and different DMX refresh rates.  These features can save your show!

You’ll also notice that higher quality units are going to use high-quality connectors (very important for reliability!), and often feature the Neutrik EtherCON connector for the Ethernet, which is much more durable than the standard RJ-45 plug.

Power over Ethernet (POE) is a handy feature available on some nodes, and this allows you to literally power your node via ethernet – no external power needed.  To make this work, you’ll either need a router or switch that provides POE or a POE injector.

Customer Support

Have you ever had a problem with a piece of gear and needed to call or contact customer service?  I’ve called and emailed a LOT of different companies over time, and I can tell you that there is a HUGE difference between different brands.

Companies like ENTTEC, Chauvet, and Elation have been around for a long time, and have amazing customer support.  When you have a problem, whether it’s the gear’s fault of your fault, they’ll walk you through the steps to get your gear working correctly…and that alone is worth the slight increase in price over the “no-name” brands!

What Node Should I Buy?

Now that we’ve covered both how Art-Net and sACN work, and some of the differences between different levels of gear, it’s time to talk specific pieces of gear!

Now, as always, the gear I feature here is a sample of great pieces of gear from companies I trust.  There are other brands out there, and surely are other other options which are good which I don’t cover here.  (There are a lot of cheap, poor quality units too – so be careful!)

How Many Universes of Node Output Do I Need?

You’ll need (1) universe of node output for each DMX universe that you need to convert out of Art-Net or sACN.

Many consoles can output a certain number of DMX universes via the “back panel” of the console, and then additional universes via Art-Net/sACN, so you may not need a node for each DMX universe in your show.

Any node can be configured to output any universe – so you may have multiple nodes outputting the same universe to different sections of your lighting rig – it’s all understanding and planning out what you need before you buy!

Entry-Level: 1-2 Universe Nodes


The ENTTEC ODE is one of the most popular single-universe nodes out there for good reason – it’s well-built, easy to configure and supports merging as well as DMX-input.  The current MK2 version also offers DHCP, or easy network setup.

All ENTTEC nodes, including the ODE, are configurable via ENTTEC’s NMU software.

There is also a POE version of the ODE here, which allows you to power it via Ethernet.

Chauvet DMX-AN

Chauvet’s DMX-AN is a low-cost node that offers basic functionality.  It can speak Art-Net and sACN, but only offers 3 pin DMX – to get 5-pin, you’ll need an adapter.

I really like the DMX-AN – not only does it look good on paper, but it performs well in the real world too.  It’s one of the least expensive nodes you can buy, and while it doen’t have all of the advanced features other nodes have, it’s a solid buy.  Check out my full review of the DMX-AN here!

Configuration via web browser is available, however there is not a network management program like ENTTEC offers and it does not offer DHCP.

ENTTEC Ethergate MK3

The Ethergate MK3 is ENTTEC’s 2-port node that supports Art-Net and sACN.  Similar to the ODE, the Ethergate MK3 supports merging, DMX input, and can be rack-mounted via a kit.

4-Port Nodes:

Elation eNode 4

Elation’s eNode 4 is one of the most popular 4-port nodes out there because it offers Art-Net and sACN, and 4 universes of output is perfect for ONYX, Chamsys and other PC version consoles.

The eNode 4 however, is not configurable from a computer and lacks DHCP, but it does offer the ability to do merging.

8 Port and Larger Nodes:

ENTTEC Storm 8 and Storm 24

Enttec’s Storm series nodes are some of the most cost-effective nodes available on the market, while still keeping the high quality we love from Enttec.  They feature everything you’d expect from ENTTEC – DMX output, merging and easy configuration thanks to the NMU software.

Both units are very compact and output DMX via RJ-45 connectors – adapting that to 3 or 5 pin DMX can be done via a very inexpensive adapter.  I especially love the Storm 8 because you can get 8 universes of DMX data out for only a little more than the cost of the Elation eNode 4 above, and the Storms offer DHCP.

The Storm 8 offers 8 universes of DMX output, while the Storm 24 offers 24.  If you need more than 4 universes of DMX, the Storm is a great unit!

Like Our Free Content?

Click Here

For the Very Best Learn Stage Lighting Has to Offer​....

  • […] Here is my full post with everything you need to begin with Art-Net and sACN: Learn more about Art-Net and sACN here! […]

  • […] Pixelator system begins at your lighting console or media server, which sends out Art-Net or sACN data to your Pixelator or Pixelator […]

  • […] Choosing between Art-Net and sACN?  I generally recommend sACN, but you can learn more about both of them here! […]

  • […] output DMX you can use the Enttec open-DMX box or the Enttec Pro-DMX box. D-Pro also supports Artnet and this allows you to use numerous Artnet-capable hardware to output […]

  • […] You can also get up to (4) total universes using Onyx USB devices (such as M-DMX, M-Touch, M-Play, and M2PC.) OR Art-Net and sACN (Here’s my guide on Art-Net and sACN  nodes). […]

  • […] would go with Art-Net or sACN for many reasons. Each floor only needs 1 network cable to it from your Network Controller. This […]

  • […] cool thing about lighting pixels is that they speak the same networked DMX signal that lighting consoles use to work with regular […]

  • […] per DMX universe.  In this case, it makes more sense to come straight out of the console or Art-Net / sACN node and then go to your lights. You don’t need a […]

  • […] reason for using Networking is for networked DMX. As technology and functions become more complex the need for Network and cables are becoming more […]

  • […] lights today can take networked DMX in natively, and don’t even use DMX cables at all! As we move further into the future, this […]

  • […] into the future, MOST merging is now happening via Art-Net or sACN – networked DMX signal. These signals can be merged by many output nodes or inside of lighting […]

  • […] If you don’t have an output device you will definitely need one. Lightkey does provide information on the supported interfaces, such as ENTTEC USB interfaces and networked DMX nodes. […]

  • […] now in 2019 as I am updating this, an Art-Net or sACN node is probably a better buy for the future, ENTTEC USB to DMX devices are still very popular, so I am […]

  • […] to a different output. Then, try a different console or use a PC to test your lights using an Art-Net or sACN node, which is a great tool to have around as a backup or for […]

  • >