Talking with some students from Learn Stage Lighting Labs I’ve found that there are some situations where you are limited to 1 DMX Universe. With that, I decided to take on a challenge.
In this challenge, I’m going to start from scratch and build a 24-foot wide by 18-foot deep stage. The challenge is how many lights can I get in 1 DMX Universe as well as how can I make the most impact on this stage design with a limited amount of lights.
To get started in this tutorial I am using this as a basic band setup. But this challenge and advice can be used for both temporary and permanent installs. You can also use this for churches, DJ’s, and even theaters.
Using a 3D Visualizer
In this tutorial, I use a 3D visualizer, Capture. This helps makes it very simple to design and build out the stage. In this video, I decided to start with a basic stage set up with drums.
Setup Your Stage
Depending on whether this is permanent or temporary install will play a major role in your design. The key part is knowing where your power will be coming from.
An important piece to remember is how can you make the most impact withing your range (budget or even DMX universe). In this challenge we’re focusing on how many lights can we work with and keep within the one DMX universe.
Choosing Your Lights
Once you have the basics of your design created such as light placements, source of power, and trusses if needed you now want to focus on the type of lights to use.
The key to this challenge is finding out which lights won’t take up a lot of channels because it can add up very quickly. In this video, I was able to work with some LED Pars that only take 3 – 4 channels. Also, keep in mind what type of features you ideally would like to have for those lights.
Here are the lights I worked with during this tutorial
If you are just starting out I highly recommend working with one brand of lights as much as possible. This will help save you money if you are able to buy these lights at once. Not to mention if you do go through a dealer they will be sure to give you the support and attention needed.
Designing Your Stage
Now it’s time to start designing your stage using the 3D Visualizer. I always start with the front stage wash. If you are using Capture to design your stage be sure to turn up the “ambient light” feature that works great for when you layout your lights.
Patch Your Fixtures
Next, you want to patch in your fixtures so that you know exactly how much channels you have leftover to work with. If you selected lights that don’t need as many DMX channels, you may be surprised with what is leftover.
If you still have some channels left over definitely take a look at the stage and see if there are any additional features you want to add to it.
If you do take the time to plan out what you are working with and the impact you want to make on the stage, you really can do a lot with just one DMX universe.
In the video I had mentioned the principles I go by when designing and setting up a new stage. Inside of Learn Stage Lighting Labs, we offer some great tutorials on how to get started as well as a community of other lighting experts that have been where you are. Be sure to check it ou!
Like Our Free Content?
For the Very Best Learn Stage Lighting Has to Offer....